Project #1 is DUE on Tuesday!

We wrote all this on the board, but let’s re-cap so you’re all 100% positive what you need for Tuesday.

Your TYPE-ONLY solution, trimmed and mounted*

Your TYPE-AND-IMAGE solution, trimmed and mounted*

Be neat. Pay attention to craft. Print multiple copies before you start mounting. Plan your layout, do some math beforehand to know what size your borders should be. Leave space between your frames. Get a new X-acto blade. Use a straight edge. Use spray mount or rubber cement. If you mess it up, do it over. 

Remember, your frames must be a 4:3 or a 16:9 aspect ratio.

*Please include on a label on the back: Your name, Project #1, ART 224, Winter 2012, Will and Nicole

Your process book 

This should contain all of your sketches, mood boards, iterations, edits and experiments. Organize it chronologically so we can see your progression. Print out ALL OF YOUR PROCESS. If we can’t see it, we don’t know you did it.

Your rationale paper

Remember to explain WHAT and WHY. There shouldn’t be any explanation of WHAT you did unless you explain WHY. Conversely, if you’re discussing your solution’s concepts, make sure you explain WHAT you did to get them across. This paper should be between one and two pages, and be 10pt type, double-spaced. Print double-sided if you can but if not, staple your two pages together. Please include at the top of your page: Your name, Rationale Paper, Project #1, ART 224, Winter 2012, Will and Nicole

Remember, if you put time and care into your project, we’ll know. Impress us. Do your good work justice by presenting it well. And GOOD LUCK! We’re excited to see your final work.